The Adhesive Sourcebook 2017: Your Source for LOCTITE products for design, assembly, manufacturing and maintenance
Brush or spray SF 754 Rust Treatment onto any wire-brushed or sanded surface. Leave on some rust. SF 754 Rust Treatment goes on white. Turns black in 10 minutes. 6 Months: SF 754 Rust Treatment continues to prevent rust even with constant water/salt spray contact. 1 Year: Even under continuous high humidity, SF 754 Rust Treatment still looks new. 18 Months Later: SF 754 Rust Treatment still keeps old rust from coming back. Prevents new rust from starting.
SF 754 Rust Treatment's unique capability makes it ideal for maintenance use in applications where sandblasting is not practical or economical. SF 754 Rust Treatment gives a quality level of conversion and protection, especially when followed by conventional prime and/or finish coats. Most finish paints will not require any additional primer. However, light color latex and metal-filled paints require a solvent base primer on top of SF 754 Rust Treatment coating before finish application. SF 754 Rust Treatment was tested for 100 hours at 95F, condensing humidity, salt spray (ASTM B117-73), and satisfactory performance was obtained. This test is equivalent to two years of outdoor exposure. Protection is enhanced with SF 754 Rust Treatment plus an overcoat such as epoxy, alkyd, urethane, or chlorinated rubber.
BEFORE AFTER SF 754 RUST TREATMENT AND FRESH PAINT
SURFACE RESTORATION MADE EASY!
STOP RUST DEAD WITH LOCTITE SF 754 RUST TREATMENTPrevious Page